BS EN 1411 1996
|
ID： |
4F2E3497EAC2469B875D05E977BFCC6B |
|
文件大小(MB)： |
0.09 |
|
页数： |
16 |
|
文件格式： |
|
|
日期： |
2013-7-8 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,1411 : 1996,BS 2782 :,Part 11 :,Method 1108B :,1996,The European Standard EN 1411 : 1996 has the status of a,British Standard,ICS 23.040.20,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,Plastics piping and ducting,systems D,Thermoplastics pipes D,Determination of resistance to,external blows by the staircase,method,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Oct 22 00:56:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,This British Standard, having,been prepared under the,direction of the Sector Board for,Materials and Chemicals, was,published under the authority of,the Standards Board and comes,into effect on,15 August 1996,ó BSI 1996,The following BSI references,relate to the work on this,standard:,Committee reference PRI/61,Draft for comment 94/341019 DC,ISBN 0 580 25877 7,BS EN 1411 : 1996,Amendments issued since publication,Amd. No. Date Text affected,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical Committee,PRI/61, Plastics piping systems and components, upon which the following bodies,were represented:,British Gas plc,British Plastics Federation,British Plumbing Fittings Manufacturers' Association,British Valve and Actuator Manufacturers' Association,Department of the Environment (British Board of Agrement),Department of the Environment (Building Research Establishment),Department of the Environment (Property and Buildings Directorate),Department of Transport,Electricity Association,Federation of Civil Engineering Contractors,Health and Safety Executive,Institute of Building Control,Institute of Materials,Institution of Civil Engineers,Institution of Gas Engineers,Institution of Water and Environmental Management,National Association of Plumbing, Heating and Mechanical Services,Contractors,Pipeline Industries Guild,Plastics Land Drainage Manufacturers' Association,Society of British Gas Industries,Society of British Water Industries,Water Companies Association,Water Services Association of England and Wales,The following bodies were also represented in the drafting of the standard, through,subcommittees and panels:,ERA Technology Ltd.,Engineering Equipment and Materials Users' Association,RAPRA Technology Ltd.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Oct 22 00:56:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 1411 : 1996,i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Method,1 Scope 3,2 Definitions 3,3 Principle 3,4 Apparatus 3,5 Test pieces 5,6 Conditioning 6,7 Procedure 6,8 Calculations 8,9 Test report 8,Annex,A (informative) Bibliography 9,Tables,1 Dimensions for the nose of the striker 3,2 Masses of strikers 3,3 Conditioning periods 6,Figures,1 Typical impact testing machine 4,2 Dimensions of strikers 5,3 Typical record for impact test data, obtained using the staircase method,(in this example, the H50 value = 1,14 m) 7,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Oct 22 00:56:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,ii,BS EN 1411 : 1996,National foreword,This British Standard has been prepared by Technical Committee PRI/61 and is the,English language version of EN 1411 : 1996 Plastics piping and ducting systems D,Thermoplastics pipes D Determination of resistance to external blows by the,staircase method, published by the European Committee for Standardization (CEN).,It is incorporated into BS 2782 Methods of testing plastics : Part 11 : Thermoplastics,pipes, fittings and valves, as Method 1108B : 1996, for association with related test,methods for plastics materials and plastics piping components.,This test method has been prepared for reference by other standards under,preparation by CEN for specification of reinforced plastics piping systems and,components. It has been implemented to enable experience of the method to be gained,and for use for other fresh applications.,It is also for use for the revision or amendment of other national standards as,practicable, but it should not be presumed to apply to any existing standard, which,contains or makes reference to a different test method, until that standard has been,amended or revised to make reference to this method and any requirements adjusted,as appropriate.,Warning note. This British Standard, which is identical with EN 1411 : 1996, does not,necessarily detail all the precautions necessary to meet the requirements of the Health,and Safety at Work etc. Act 1974. Attention should be paid to any appropriate safety,precautions and the method shou……
……